Suzuki Samurai 2 Inch Body Lift
	Quantity in Basket: None Code: Sami-BL-002 Price: $119.00 Shipping Weight: 3.01 pounds
	Quantity:
Sky Manufacturing is the only company to mass-produce a 1" and 2" body lift kit for the Samurai and 2" Sidekick Kit. Includes blocks CNC machined from black UHMW, longer metric bolts, custom-built stud connectors, and instructions. Installs in approximately 2 hours, gives necessary motor clearance or larger tire clearance. Samurai 1÷ & 2÷ Body Lift Parts Included: 10 Body Blocks 6 Body Stud Connectors 6 Large Plate Washers 4 Metric Bolts, L/W, F/W Instructions: First loosen and remove body bolts, 2 front under grill, 2 in front of the doors, 4 across seam in front of the rear tires, 2 under the tailgate. Next loosen steering at firewall junction. Remove 10mm bolts holding brake hose to firewall under the battery. Everything loose should have adequate stretch, but check as install progresses. Lift the body with floor jacks, one side at a time, remove bottom rubber bushing and washer from cross member mounts. Leave upper rubber bushing in place on frame, install blocks between body and this bushing. You will have to remove the inner steel bushing sleeve. Repeat to other side. It may be necessary to trim blocks for rearward most position. Install body stud connectors. Align new bolts to there location before tightening anything, this will make the process much easier. Align body to frame as needed. Reuse the stock rear rubber grommet on 2 new metric bolts. Install 2 new metric bolts in front using washer and lock washer provided. Tighten all bolts to factory specs using loc-tight, check all wires and lines for clearance. Tighten steering. It is possible to drill new holes for the brake line, but we have yet to have found a need for this.Removal of the rear bumper will help installation. This kit is intended for installation on vehicles displayed in vehicle above. It is not intended for vehicles drive on public roads nor public nor private property. The purpose of this kit is to lift a vehicle¦s body from its frame to permit the installation of larger wheels and tires. Modifications of body to frame attachments, installation of larger wheels and tires or any other modifications to a stock vehicle are likely to cause changes, sometimes severe. The purchaser and installer of this kit assume all risk resulting from the improper installation of these components and the effects of changing the handling characteristics and structural integrity of the vehicle.