BTF Cross-Over Steering Bracket for Dana 30-44 Knuckle
	Quantity in Basket: None Code: BTF11100 Price: $149.99 Shipping Weight: 8.01 pounds
	Quantity:
The "BTF Cross-Over Steering Bracket for Dana 30/44 Knuckle" was designed about 3 years ago for a custom spring-over we were doing here at Blue Torch.This bracket bolts to the passenger side steering knuckle in 5 places.It allows you to raise the drag-link above the leaf spring in a sprung-over YJ to minimize bump-steer.It also allows you to raise the drag-link to the top of the knuckle to gain about 3" of ground clearance.This part will also bolt to TJ Dana 30/Dana 44 knuckles for custom built steering applications.The axle brackets will have to be shaved to allow for clearance of the tie-rod when it is relocated above the knuckle.This bracket bolts through 2 of the 3 holes in the spindle.It also bolts through the top of the knuckle in 3 places.Two holes must be drilled to complete the installation.The existing tapered hole in the knuckle for the tie rod must be drilled to 5/8" to allow for a 3/4 x 5/8" heim joint.This bracket was designed in a 3D modeling software for great fit and is fabricated from 1/4" high-strength steel plate and is fully welded and gusseted for ultimate strength.