BTF Angle Link Tab Set for Dana 60-14 Bolt
	Quantity in Basket: None Code: BTF03058 Price: $23.99 Shipping Weight: 5.01 pounds
	Quantity:
Like all of the BTF laser-cut link brackets, the "BTF Angle Link Tab Set for Dana 60/14 Bolt" are laser-cut from 5/16" thick high-strength steel plate. The brackets are designed to work on axle tube diameters from 3 1/8" to 3 1/2". The shorter bracket measures 1 1/2" from the edge of the axle tube to the center of the bolt hole to accomodate the largest of suspension joints. The bolt hole size is laser cut to 5/8" but could be drilled up to 1" if necessary. Double-triangualted four-links require the bottom links to come off the axle tube at an angle so the links can meet just under the transfercase. BTF offers this tab set to do just that. The tabs would be used by placing one long and one short tab on each side of the axle. This will make the link come off the axle tube at an angle. If the angle is not exactly what you need you can simply trim a little off one tab to get more or less angle. In this tab set you will recieve 2 long tabs and 2 short tabs.